The Bluetooth Scanner for Mobile can be synced with a tablet in order to make scanning via the mobile app even easier.

The following instructions will help you setup/sync the scanner to your device and change default settings.

Attaching to iOS Device:

  1. Go to Settings > Bluetooth
  2. Push button on scanner then scan Disconnect barcode under “Getting Connected” of scanner documentation
  3. Scan the “BT mode – HID” barcode
  4. Tap the “Wireless Scanner” listed on the iPad.
    1. It will go through the pairing process, will become listed under “My Devices,” and will say “Connected.”

 

Attaching to Android Device:

  1. Go to Settings > Bluetooth
  2. Push button on scanner then scan Disconnect barcode under “Getting Connected” of scanner documentation
  3. Scan the “BT mode – HID” barcode
  4. Tap “Wireless Scanner” listed on the Android device
    1. It will go through the pairing process and become listed under “Paired Devices”

 

Changing Timeout Setting:

Note: The default timeout is set to three minutes. We’d suggest setting it to 60 minutes.

  1. Go to page 11 of Quick Guide scanner documentation
  2. Scan the “Set Minute” barcode
  3. Scan the desired minutes using the number barcodes on pages 9 and 10
    1. The permitted range is between 00 – 60
  4. Scan the “Set Minute” barcode again

You can do the same thing with seconds (range: 00 – 60) or scan the “No Timeout” barcode on page 11 to set the scanner to always be on.

 

Adjusting iOS Keyboard Toggle:

Note: You will likely need to enable the iOS hotkey on the scanner to turn on/off the iOS onscreen keyboard via the scanner.

  1. Connect the scanner to your iOS device
  2. Scan the “Enable iOS Hotkey” barcode on page 12 of the Quick Guide
  3. Once enabled, you can double-click the trigger of the scanner to toggle the iOS on-screen keyboard